STC MCU Board

YCTECH industrial product control board development includes industrial control board software design, software upgrade, schematic diagram design, PCB design, PCB production and PCBA processing located in the east coast of China. Our company designs, develops and manufactures STC MCU board. STC is a single-chip microcomputer produced by China itself, and it is a single-clock/machine cycle (1T) single-chip microcomputer produced by Hongjing Technology.

STC MCU is a new generation of 8051 MCU with high speed/low power consumption/anti-interference. The instruction code is fully compatible with traditional 8051, but the speed is 8-12 times faster. Internally integrated MAX810 dedicated reset circuit, 2-way PWM, 8-way high-speed 10-bit A/D conversion (250K/S), for motor control,

General-purpose I/O ports (36/40/44), after reset: quasi-bidirectional port/weak pull-up (ordinary 8051 traditional I/O port), can be set to four modes: quasi-bidirectional port/weak pull-up, Push-pull/strong pull-up, input only/high impedance, open drain, each I/O port can drive up to 20mA, but the maximum of the whole chip should not exceed 120mA;

Extended information

STC’s 1T enhanced series is not only fully compatible with 8051 instructions and pins, but also has a large-capacity program memory and is a FLASH process. For example, the STC12C5A60S2 microcontroller has a built-in up to 60K FLASHROM.

Memory users of this process can be erased and rewritten electrically. Moreover, the STC series MCU supports serial programming. Obviously, this kind of one-chip computer has very low requirement to the development equipment, and the development time is also greatly shortened. The program written into the microcontroller can also be encrypted, which can well protect the fruits of labor.